Singapore to Sullana flights
Sullana lies 19,371 km (12,036 mi) south-east of Singapore, -13 h on the clock. What the numbers say about getting there, and where to book.
A nonstop flight would take about 25 h 35 min gate to gate, based on the distance and typical cruise speed with taxi and climb allowed for; connecting itineraries add the layover on top.
| Singapore | Sullana | |
|---|---|---|
| Country | Singapore | Peru |
| Population | 5.6 million | 160,789 |
| Elevation | 23 m (75 ft) | 60 m (197 ft) |
| Time now | UTC+8 (Asia/Singapore) | UTC-5 (America/Lima) |
| Nearest large airport | SIN, 17 km out | PIU, 34 km out |
Clocks in Sullana are 13 h behind Singapore right now, so a 25 h 35 min journey lands only 12 h 35 min later by the destination clock.
What changes when you arrive in Sullana
Crossing from Singapore into Peru: money changes from the Dollar to the Sol (PEN); traffic switches to the right; sockets are Euro, NEMA 1-15, NEMA 5-15; the dialling code becomes +51; the emergency number is http://www.wikidata.org/entity/Q25648807 / http://www.wikidata.org/entity/Q25648856.
Airports at each end
Leaving Singapore
Singapore is served by 5 airports with scheduled flights within 100 km. The closest large one is Singapore Changi Airport (SIN), 17 km (11 mi) from the centre, whose 13,123-ft runway is long enough for long-haul wide-body aircraft. The alternatives are Hang Nadim International Airport (BTH, 35 km), Senai International Airport (JHB, 44 km), Seletar Airport (XSP, 14 km), Raja Haji Fisabilillah International Airport (TNJ, 86 km).
Arriving in Sullana
Sullana is served by 2 airports with scheduled flights within 100 km. The closest large one is PAF Captain Guillermo Concha Iberico International Airport (PIU), 34 km (21 mi) from the centre, with a longest runway of 8,202 ft, which limits it to short and medium-haul aircraft. The alternatives are Captain Victor Montes Arias International Airport (TYL, 73 km).
| Airport | Code | From centre | Longest runway | Elevation |
|---|---|---|---|---|
| PAF Captain Guillermo Concha Iberico International Airport (regional) | PIU | 34 km (21 mi) | 8,202 ft | 120 ft |
| Captain Victor Montes Arias International Airport (regional) | TYL | 73 km (45 mi) | 8,038 ft | 282 ft |
One end has no runway over 10,000 ft, so at 19,371 km (12,036 mi) this pair is unlikely to be flown nonstop by a wide-body; expect a connection.
Book a flight to Sullana
Our airline partner is activating live fares for this site; the search below opens the moment that is done. Hotels can be booked now.
Flights are sold here by AirOrSeaTravel through our booking partner, Nuitée, which takes the payment; the ticket is issued by the airline. How this works.
Staying in Sullana
Live rooms and prices for Sullana are in the search below.
Book a hotel in Sullana
Live rooms and prices from our booking partner, booked and paid for here. Free cancellation is marked where it applies.
Common questions
How far is Sullana from Singapore?
19,371 km (12,036 mi) in a straight line, south-east of Singapore.
How long does it take to get from Singapore to Sullana by air?
About 25 h 35 min, estimated from distance and typical speeds for a nonstop flight. Timetables and traffic decide the real figure.
Is there a time difference between Singapore and Sullana?
Sullana is 13 h behind at the moment (America/Lima against Asia/Singapore).
Which airports are used for Singapore to Sullana flights?
Typically Singapore Changi Airport (SIN) to PAF Captain Guillermo Concha Iberico International Airport (PIU); Sullana also has TYL.
What currency do I need in Sullana?
The Sol (PEN).
Where these facts come from
- GeoNames (CC BY 4.0): population, elevation, time zone, postal codes
- Wikidata (CC0): area, sister cities, visitor numbers, heritage listings, stations and ports
- OurAirports (public domain): airports, runways
- Natural Earth (public domain): map outlines
Data compiled 14 September 2026. Hotel and hostel figures are from our booking partner’s catalogue on that date. Journey times on this page are estimates from distance, not timetables; check the operator before you rely on one.